Maintenance methods for batteries of industrial floor scrubbers with liquid filled batteries

1. Industrial floor cleaning machine bottles should be checked for liquid level every ten days. If the liquid level is close to the lead plate (the electrode plate cannot be exposed to the air), distilled water (available in supermarkets) should be compensated in a timely manner, about 3 millimeters below the plastic mouth, to prevent compensation for tap water, pure water, or battery solution.

2. The floor scrubber battery should be refilled with water after the battery has been charged.

The maintenance method of rechargeable battery type industrial floor scrubber battery:

The battery of the new industrial floor scrubber should be charged for at least 14 hours before being fully charged. The normal charging time is about 8 hours. You can choose to charge it at the end of each day and disconnect the charger the next day at work. After the battery is fully charged, the charger usually automatically and continuously charges the battery.

2. When charging the battery powered industrial floor scrubber, please turn off the power first. The charger should be connected to the machine end before turning on the power.

3. The surface of the industrial floor scrubber must be kept clean at all times. When cleaning the control panel, a dry cloth should be used to wipe it to prevent moisture from seeping into the panel and burning out the circuit board and electronic components.

4. Industrial floor scrubbers should be charged within 24 hours, otherwise the battery may be damaged.

5. When charging the floor scrubber battery, please ensure that the socket power supply is not touched, and the charger plug and battery plug are not touched.

6. If the rechargeable battery is not used for washing the floor for a long time, it should be recharged every two to three months.