1、 Before use, please carefully read the instructions of the hand pushed floor scrubber, driving floor scrubber, battery powered floor scrubber, and fully automatic floor scrubber. Especially for users who are new to floor scrubbers, it is necessary to fully understand the working principle of the floor scrubber and the functions of each button before operating the machine.

2、 When operating the floor scrubber, please carefully check the integrity of the machine. WeChat image_20200429102309.jpg

3、 If there are some large particles, metal wires, lathe waste, small stones, and other garbage that can affect the water scraping work on the cleaned ground, it needs to be cleaned up. The water absorbing scraper needs to form a closed space with the ground in order to recycle sewage. Otherwise, if it is not closed, it cannot work properly and can also cause damage to the floor scrubber. For floors that are using a floor scrubber for the first time, it is important to frequently dry them

Clean the absorbent rubber with a clean cloth to prevent the absorbent strip from not being able to absorb and leaving water stains one after another.

4、 Preparation for cleaning: First check if the machine has power. If the power is low, please do not use the machine. Excessive discharge can significantly shorten the lifespan of the battery;

Next, check and wipe the brush disc, rubber, etc. Choose the appropriate cleaning agent based on the dirt on the ground. For example, for general cement tile floors, it is necessary to choose a neutral cleaning agent and inject an appropriate amount of defoaming agent into the sewage tank at the same time; If the ground is contaminated with oil, it is necessary to use a degreasing agent.

5、 Before starting the disk brush motor, be sure to lower the disk brush, otherwise the disk brush will be started and removed.

6、 For particularly dirty floors. You can choose to wash it repeatedly without absorbing water, and then absorb water separately; For uneven ground, sometimes after cleaning, there may still be water accumulation. Therefore, lift the brush tray, start the suction motor switch, push the floor scrubber, and repeatedly absorb the water in the flooded area.

7、 It is more important to clean, maintain, and maintain the fully automatic floor scrubber!!! The specific method is as follows: clear the clean water and sewage in the equipment. Due to long-term storage of clean water with cleaning agents, it will emit odor, deteriorate, and affect the cleaning effect due to factors such as temperature. After the sewage is discharged, the sludge, debris, garbage, etc. in the sewage tank should be cleaned up in a timely manner